0805LS (2012) Series
Chip Inductors

New RoHS part numbers are shown. The products were always compliant; only the part numbers changed. The second to the last character is now L to indicate RoHS compliance. (Old data sheet can be viewed here.)

Ferrite construction for higher current carrying capacity
Lowest DCR in an 0805 form factor
Inductance values from 0.078 µH to 27 µH
RoHS Compliant. 260°C compatible. Silver-palladium-platinum-glass frit terminations
COTS Plus tin-silver-copper and tin-lead terminations available
Samples of all values (5% tolerance) available in Coilcraft Designer's Kit C354

Photo Pricing Materials declaration PDF data sheet

SPECIFICATIONS

L vs Frequency Q vs Frequency Current Derating Dimensions

Tape and reel specifications S-Parameters SPICE models

0805LS-78NX_L_ 0.078 @ 7.9 MHz 5,2 19 @ 7.9 MHz 1440 0.042 2.0 Black

0805LS-111X_L_ 0.110 @ 7.9 MHz 5,2 19 @ 7.9 MHz 1200 0.05 2.0 Brown

0805LS-471X_L_ 0.470 @ 7.9 MHz 5,2 19 @ 7.9 MHz 500 0.31 0.720 Red

0805LS-681X_L_ 0.680 @ 7.9 MHz 5,2 20 @ 7.9 MHz 400 0.46 0.590 Orange

0805LS-102X_L_ 1.0 @ 7.9 MHz 5,2 20 @ 7.9 MHz 340 0.69 0.500 Yellow

0805LS-122X_L_ 1.2 @ 7.9 MHz 5,2 15 @ 7.9 MHz 280 1.20 0.400 Brown

0805LS-152X_L_ 1.5 @ 7.9 MHz 5,2 20 @ 7.9 MHz 275 1.03 0.490 Green

0805LS-182X_L_ 1.8 @ 7.9 MHz 5,2 20 @ 7.9 MHz 246 1.15 0.410 Blue

0805LS-222X_L_ 2.2 @ 7.9 MHz 5,2 20 @ 7.9 MHz 106 1.28 0.365 Brown

0805LS-272X_L_ 2.7 @ 7.9 MHz 5,2 20 @ 7.9 MHz 105 1.48 0.350 Violet

0805LS-332X_L_ 3.3 @ 7.9 MHz 5,2 20 @ 7.9 MHz 83 1.57 0.330 Gray

0805LS-392X_L_ 3.9 @ 7.9 MHz 5,2 20 @ 7.9 MHz 52 1.70 0.300 White

0805LS-472X_L_ 4.7 @ 7.9 MHz 5,2 20 @ 7.9 MHz 50 1.87 0.280 Black

0805LS-682X_L_ 6.8 @ 7.9 MHz 5,2 20 @ 7.9 MHz 35 2.25 0.260 Brown

0805LS-822X_L_ 8.2 @ 2.5 MHz 5,2 18 @ 2.5 MHz 27 2.55 0.250 Red

0805LS-103X_L_ 10 @ 2.5 MHz 5,2 18 @ 2.5 MHz 21 3.45 0.200 Orange

0805LS-153X_L_ 15 @ 2.5 MHz 5,2 18 @ 2.5 MHz 17 5.03 0.180 Yellow

0805LS-223X_L_ 22 @ 2.5 MHz 5,2 18 @ 2.5 MHz 13 6.18 0.150 Green

0805LS-273X_L_ 27 @ 2.5 MHz 5,2 15 @ 2.5 MHz 11 11.04 0.120 Blue


1	When ordering, please specify tolerance, termination and packaging codes: e.g. 0805LS-273XGLC

	Tolerance:	G = 2%, J = 5%
	Termination:	L = RoHS compliant silver-palladium-platinum-glass frit Special order, added cost: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
	Packaging:	C = 7" machine-ready reel EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead.

2	Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces.
3	Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture.
4	SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. Details
5	DCR measured on a Cambridge Technology Micro-ohmmeter and a Coilcraft CCF840 test fixture.
6	Irms: Current that causes a 15°C temperature rise from 25°C ambient. Details Because of their open construction, these parts will not saturate.
7	Ambient temperature range:	–40°C to +85°C with Irms current. +85°C to +100°C with derated current. Derating curve
8	Storage temperature range:	Component: –40°C to +100°C T&R packaging: –40°C to +80°C
9	Resistance to soldering heat: Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
10	Electrical specifications at 25°C.
11	Temperature coefficient of inductance (TCL): +100 to +250 ppm/°C.
Refer to Soldering Coilcraft Components before soldering.

0805LS (2012) Series Chip Inductors

SPECIFICATIONS