0805USB
Series
Common Mode Choke
| New RoHS part numbers are shown. The products were always compliant; only the part numbers changed. The second to the last character is now L to indicate RoHS compliance. (Old data sheet can be viewed here.) |
- Eliminates virtually all common mode noise
- Designed for USB 2.0, IEEE 1394, HDMI and LVDS applications
- 8 impedance values to meet your specific requirements
- Very low DCR values
- RoHS-compliant. 260°C compatible. Gold over nickel over silver-palladium-glass frit terminations.
- COTS Plus tin-silver-copper and tin-lead terminations available
- Compact size with standard 0805 footprint; for an even smaller size, see 0603USB
- For a USB filter with greater current handling see 1206USB Series
- Samples of all our USB filters are available in Coilcraft Designer's Kit C384
Photo 
Pricing 
Materials declaration 
PDF data sheet
SPECIFICATIONS
Attenuation
curves
Impedance curves
Dimensions 
Schematic
 |
||||||||||
| 0805USB-421ML_ | 14 | 42 | 70 | 1.1 | 2.3 | 8.4 | 23 | 0.12 | 250 | 500 |
| 0805USB-901ML_ | 28 | 90 | 154 | 1.4 | 4.2 | 16.9 | 47 | 0.17 | 250 | 500 |
| 0805USB-172ML_ | 57 | 170 | 303 | 2.3 | 6.7 | 22.0 | 84 | 0.25 | 250 | 500 |
| 0805USB-262ML_ | 85 | 260 | 435 | 3.0 | 8.6 | 27.8 | 147 | 0.26 | 250 | 500 |
| 0805USB-372ML_ | 118 | 370 | 641 | 4.5 | 11.9 | 34.3 | 189 | 0.32 | 250 | 500 |
| 0805USB-502ML_ | 148 | 500 | 945 | 4.9 | 14.5 | 31.3 | 273 | 0.37 | 250 | 500 |
| 0805USB-672ML_ | 246 | 670 | 1231 | 8.4 | 16.6 | 30.0 | 322 | 0.45 | 250 | 500 |
| 0805USB-902ML_ | 294 | 900 | 1715 | 8.7 | 18.7 | 30.5 | 413 | 0.65 | 250 | 400 |
 |
|
|
|
|
|
|
|
|
|
|
| 1 | When ordering, please specify termination and packaging codes: e.g. 0805USB-902MLC |
| Termination: | L = RoHS compliant silver-palladium-platinum-glass frit Special order, added cost: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). |
|
| Packaging: | C = 7"
machine-ready reel EIA-481 embossed plastic tape (2000 per full reel). B = Less than full reel In tape, not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13" machine-ready reel EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). |
| 2 | Inductance measured at 100 MHz, with windings connected in parallel, using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture. | |
| 3 | DCR is specified per winding. | |
| 4 | Irms: Current per winding that causes a 20°C temperature rise from 25°C ambient. Details | |
| 5 | Ambient temperature range: | –40°C to +85°C |
| 6 | Storage temperature range: | Component: –40°C to +85°C T&R packaging: –40°C to +80°C |
| 7 | Resistance to soldering heat: Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between. | |
| 8 | Electrical specifications at 25°C. | |
| Refer to Soldering Coilcraft Components before soldering. | ||
|
|
||
|
|
||