1206USB
Series
Common Mode Choke
|
New RoHS part numbers are shown. The products were always compliant; only the part numbers changed. The second to the last character is now L to indicate RoHS compliance. (Old data sheet can be viewed here.) |
- Eliminates virtually all common mode noise
- Designed for USB 2.0, IEEE 1394, HDMI and LVDS applications
- 9 impedance values to meet your specific requirements
- Very low DCR values
- RoHS-compliant. 260°C compatible. Gold over nickel over silver-palladium-glass frit terminations.
- COTS Plus tin-silver-copper and tin-lead terminations available
- For a smaller footprint USB filter see 0603USB or 0805USB Series
- Samples of all our USB filters are available in Coilcraft Designer's Kit C384
Photo 
Pricing 
Materials declaration 
PDF data sheet
SPECIFICATIONS
Attenuation
curves
Impedance curves
Dimensions 
Schematic
Tape and reel specifications
 |
||||||||||
| 1206USB-371ML_ | 15 | 37 | 95 | 1.0 | 2.1 | 12.0 | 31 | 0.10 | 250 | 1000 |
| 1206USB-102ML_ | 30 | 100 | 200 | 1.5 | 4.2 | 19.0 | 66 | 0.14 | 250 | 850 |
| 1206USB-172ML_ | 55 | 170 | 345 | 2.3 | 6.8 | 26.0 | 107 | 0.18 | 250 | 700 |
| 1206USB-262ML_ | 85 | 265 | 545 | 3.0 | 9.7 | 31.0 | 161 | 0.22 | 250 | 600 |
| 1206USB-372ML_ | 125 | 370 | 775 | 4.7 | 12.0 | 33.0 | 226 | 0.26 | 250 | 600 |
| 1206USB-532ML_ | 170 | 530 | 1190 | 5.5 | 15.0 | 35.0 | 319 | 0.30 | 250 | 600 |
| 1206USB-672ML_ | 200 | 670 | 1500 | 7.3 | 16.5 | 33.0 | 412 | 0.34 | 250 | 500 |
| 1206USB-872ML_ | 265 | 870 | 2010 | 9.1 | 18.0 | 32.0 | 510 | 0.39 | 250 | 500 |
| 1206USB-113ML_ | 330 | 1100 | 2425 | 10.2 | 21.0 | 31.0 | 623 | 0.44 | 250 | 500 |
 |
|
|
|
|
|
|
|
|
|
|
| 1 | When ordering, please specify termination and packaging codes: e.g. 1206USB-113MLC |
| Termination: | L = RoHS compliant gold over nickel over silver-palladium-glass frit Special order, added cost: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). |
|
| Packaging: | C = 7"
machine-ready reel EIA-481 embossed plastic tape (2000 per full reel). B = Less than full reel In tape, not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13" machine-ready reel EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). |
| 2 | Inductance measured at 100 MHz, with windings connected in parallel, using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture. | |
| 3 | DCR is specified per winding. | |
| 4 | Irms: Current per winding that causes a 20°C temperature rise from 25°C ambient. Details | |
| 5 | Ambient temperature range: | –40°C to +85°C |
| 6 | Storage temperature range: | Component: –40°C to +85°C T&R packaging: –40°C to +80°C |
| 7 | Resistance to soldering heat: Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between. | |
| 8 | Electrical specifications at 25°C. | |
| Refer to Soldering Coilcraft Components before soldering. | ||
|
|
||
|
|
||