Surface Mount
Data Line EMI Filters
|
New RoHS part numbers are shown. Lead was removed from terminations. The second to the last character is now L to indicate RoHS compliance. (View old data sheet.) |
- Virtually eliminates the problem of conducted EMI in data line applications
- Provide common- and differential-mode noise attenuation
- Reduce noise by a factor of 32 from 15 MHz to 300 MHz
- High current (500 mA) versions available
- 300 Vrms isolation
- Excellent environmental stability and low cost
- Available in 10 and 8 line versions
- Consider our PDLF series for 4, 3 and 2 line applications
- RoHS-compliant. 260°C compatible. Tin-silver-copper over silver-platinum-glass frit terminations.
- Samples of all values plus samples of PDLF and through-hole versions are available in Coilcraft Designer's Kit D303
Photo 
Pricing 
Materials declaration 8000L 8500L
10000L 
PDF data sheet
SPECIFICATIONS
Typical Response 
Schematics
Dimensions
 |
||||||
| CCDLF 10000L_ | 10 | 100 | 5 | 250 | 673 | Brown |
| CCDLF 8000L_ | 8 | 100 | 5 | 250 | 540 | Black |
| CCDLF 8500L_ | 8 | 500 | 5 | 200 | 559 | Green |
 |
|
|
|
|
|
|
| 1 | When ordering, please specify packaging code: e.g. CCDLF 2500LD. | |
| Packaging |
D = 13" machine ready reel EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. |
|
| 2 | Current rating is for each line. | |
| 3 | Inductance is per winding, tested at 1 MHz. | |
| 4 | Ambient temperature range: | –40°C to +85°C |
| 5 | Storage temperature range: | Component: –40°C to +85°C T&R packaging: –40°C to +80°C |
| 6 | Resistance to soldering heat: Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between. | |
| 7 | Electrical specifications at 25°C. | |
| Refer to Soldering Coilcraft Components before soldering. | ||