Data Line
EMI Filters
|
New RoHS part numbers are shown. Lead was removed from terminations. The last character is now L to indicate RoHS compliance. (Old data sheet can be viewed here.) |
- Common-mode and differential-mode filtering in a single component
- Reduce conducted noise by a factor of 32 from 5 MHz to 300 MHz
- Data frequencies below 200 MHz pass with minimal attenuation
- Available in 8, 4, 3 and 2 wire versions
- Meet IEC 695-2-2 needle flame test requirements
- Optional cover allows auto insertion
- RoHS-compliant. Tin-silver over tin over phos bronze terminations.
- Samples of all values plus surface mount versions are available in Coilcraft Designer's Kit D303
Photo 
Pricing 
Materials declaration
PDF data sheet
SPECIFICATIONS
Typical response curves 
Schematics
Dimensions
 |
|||||
| DLF 8000L | 8 | 100 | 28 | 100 | 300 |
| DLF 8500L | 8 | 500 | 25 | 45 | 300 |
| DLF 4000L | 4 | 100 | 28 | 100 | 300 |
| DLF 4500L | 4 | 500 | 24 | 45 | 300 |
| DLF 3000L | 3 | 100 | 28 | 100 | 300 |
| DLF 3500L | 3 | 500 | 24 | 45 | 300 |
| DLF 2000L | 2 | 100 | 28 | 100 | 300 |
| DLF 2500L | 2 | 500 | 24 | 45 | 300 |
 |
|
|
|
|
|
| 1 | For optional cover add "C" to part number just before the "L": e.g. DLF 8500CL. Not available on 3500, 4000 and 4500 parts. | |
| 2 | Ambient temperature range: | –40°C to +85°C |
| 3 | Storage temperature range: | Component: –40°C to +85°C Packaging trays or tubes: –40°C to +80°C |
| 4 | Electrical specifications at 25°C. | |
| Refer to Soldering Coilcraft Components before soldering. | ||