Hexa-Path Magnetics
SMT Inductors and Transformers

Six 1 : 1 isolated windings that can be connected in series or parallel
Tightly coupled windings
500 Vrms isolation between each winding
Power range: 5 – 50 Watts as inductor and flyback transformer;
up to 150 Watts as forward transformer
Frequency range up to 1 MHz

There are six different sizes available with five HP parts and five HPH parts in each size. The HP parts offer lower DCR and higher Irms ratings. The HPH parts offer higher inductance and greater energy storage capabilities.

These off-the shelf parts can be used to create thousands of configurations, providing a fast and easy method for designers to create custom magnetics. By connecting the windings in series or parallel, the Hexa-Path components can be configured as inductors, coupled inductors and transformers for use in virtually any application: flyback, buck/boost, push-pull, forward, full and half bridge, Cuk, and SEPIC. See application examples.

Photo Pricing Materials declaration View PDF data sheet

SPECIFICATIONS

Winding Layouts Irms Derating Dimensions

Tape and reel specifications


HP1-1400L_	89.6	25	0.130	23.4	Note 8	Note 8	0.74
HP1-0190L_	12.2	20	0.130	23.4	29.8	0.44	0.74
HP1-0102L_	6.5	15	0.130	23.4	55.1	0.82	0.74
HP1-0076L_	4.9	10	0.130	23.4	74.7	1.1	0.74
HP1-0059L_	3.8	5	0.130	23.4	93.8	1.4	0.74

HP2-1600L_	78.4	25	0.085	30.8	Note 8	Note 8	1.13
HP2-0216L_	10.6	20	0.085	30.8	79.2	0.77	1.13
HP2-0116L_	5.7	15	0.085	30.8	184	1.6	1.13
HP2-0083L_	4.1	10	0.085	30.8	228	2.1	1.13
HP2-0066L_	3.2	5	0.085	30.8	252	2.5	1.13

HP3-0950L_	77	25	0.055	30.4	Note 8	Note 8	1.73
HP3-0138L_	11.2	20	0.055	30.4	59.6	0.65	1.73
HP3-0084L_	6.8	15	0.055	30.4	111	1.14	1.73
HP3-0055L_	4.5	10	0.055	30.4	156	1.66	1.73
HP3-0047L_	3.8	5	0.055	30.4	173	1.9	1.73

HP4-1150L_	93.2	25	0.055	47.3	Note 8	Note 8	1.88
HP4-0140L_	11.3	20	0.055	47.3	142	1.0	1.88
HP4-0075L_	6.1	15	0.055	47.3	307	2.0	1.88
HP4-0060L_	4.9	10	0.055	47.3	386	2.5	1.88
HP4-0047L_	3.8	5	0.055	47.3	490	3.2	1.88

HP5-1200L_	76.8	25	0.045	62.8	Note 8	Note 8	2.25
HP5-0155L_	9.9	20	0.045	62.8	281	1.5	2.25
HP5-0083L_	5.3	15	0.045	62.8	562	2.9	2.25
HP5-0067L_	4.3	10	0.045	62.8	626	3.4	2.25
HP5-0053L_	3.4	5	0.045	62.8	946	4.7	2.25

HP6-2400L	86.4	25	0.020	87.9	Note 8	Note 8	3.5
HP6-0325L	11.7	20	0.020	87.9	332	1.5	3.5
HP6-0158L	5.69	15	0.020	87.9	981	3.7	3.5
HP6-0121L	4.36	10	0.020	87.9	1485	5.2	3.5
HP6-0090L	3.24	5	0.020	87.9	1833	6.7	3.5

HPH1-1400L_	202	25	0.340	35.1	Note 8	Note 8	0.62
HPH1-0190L_	27.4	20	0.340	35.1	31.1	0.30	0.62
HPH1-0102L_	14.7	15	0.340	35.1	60.2	0.57	0.62
HPH1-0076L_	10.9	10	0.340	35.1	99.2	0.85	0.62
HPH1-0059L_	8.5	5	0.340	35.1	107	1.0	0.62

HPH2-1600L_	160	25	0.155	44.0	Note 8	Note 8	0.83
HPH2-0216L_	21.6	20	0.155	44.0	82.3	0.55	0.83
HPH2-0116L_	11.6	15	0.155	44.0	177	1.1	0.83
HPH2-0083L_	8.3	10	0.155	44.0	302	1.7	0.83
HPH2-0066L_	6.6	5	0.155	44.0	333	2.0	0.83

HPH3-0950L_	160	25	0.125	43.9	Note 8	Note 8	1.13
HPH3-0138L_	23.6	20	0.125	43.9	52.5	0.42	1.13
HPH3-0084L_	14.2	15	0.125	43.9	98.0	0.74	1.13
HPH3-0055L_	9.3	10	0.125	43.9	169	1.2	1.13
HPH3-0047L_	7.94	5	0.125	43.9	196	1.4	1.13

HPH4-1150L_	194	25	0.078	68.3	Note 8	Note 8	1.65
HPH4-0140L_	23.7	20	0.078	68.3	138	0.68	1.65
HPH4-0075L_	12.7	15	0.078	68.3	314	1.4	1.65
HPH4-0060L_	10.1	10	0.078	68.3	368	1.7	1.65
HPH4-0047L_	7.94	5	0.078	68.3	529	2.3	1.65

HPH5-1200L_	173	25	0.070	94.2	Note 8	Note 8	1.95
HPH5-0155L_	22.3	20	0.070	94.2	248	0.94	1.95
HPH5-0083L_	12	15	0.070	94.2	546	1.9	1.95
HPH5-0067L_	9.65	10	0.070	94.2	700	2.4	1.95
HPH5-0053L_	7.63	5	0.070	94.2	809	2.9	1.95

HPH6-2400L	194	25	0.030	131.9	Note 8	Note 8	2.9
HPH6-0325L	26.3	20	0.030	131.9	477	1.2	2.9
HPH6-0158L	12.8	15	0.030	131.9	1176	2.7	2.9
HPH6-0121L	9.8	10	0.030	131.9	1783	3.8	2.9
HPH6-0090L	7.29	5	0.030	131.9	1944	4.6	2.9

1	When ordering, please specify packaging code: e.g. HPH1-1400LD
	Termination:	L = RoHS compliant tin-silver over tin over nickel over phos bronze. Special order, added cost: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
	Packaging:	All but HP6 and HPH6: D = 13" reel, machine-ready Details EIA-481 embossed plastic tape B = Less than full reel In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter D instead. HP6 and HPH6: Packaged 24 per tray (no code letter)

2	Inductance is per winding, measured at 100 kHz, 0.1 Vrms, 0 Adc.
3	DCR is per winding, measured on Cambridge Technology micro-ohmmeter or equivalent.
4	Volt-time product is for a single winding or multiple windings connected in parallel. To calculate volt-time product for windings connected in series, multiply the value specified in the table by the number of windings connected.
5	Peak energy storage is for any combination of windings, assuming saturation current applied. See note 6 for definition of saturation current.
6	Isat: DC current at which the inductance drops 30% typ from its value without current, based on current applied to all six windings connected in series. For applications where all windings are not connected in series, use the following equation to calculate Isat: Isat = Isat`(table)` × 6 ÷ number of windings in series.
7	Irms: Current that causes a 40°C rise from 25°C ambient due to self heating, tested with continuous current flow through all windings connected in series. Application temperature rise will depend on the operating current, duty cycle, and winding connection.
8	Part is designed exclusively for use as a forward converter transformer and was not tested for energy storage and saturation current.
9	Ambient temperature range:	–40°C to +85°C with Irms current; +85°C to +125°C with derated current. Derating curve
10	Storage temperature range:	Component: –40°C to +125°C Packaging tape and reel or tray: –40°C to +80°C
11	Electrical specifications at 25°C.
Refer to Soldering Coilcraft Components before soldering.

Hexa-Path Magnetics SMT Inductors and Transformers

SPECIFICATIONS