Micro Spring™
Air Core Inductors
|
New RoHS part numbers are shown. Lead was removed from terminations. The next to the last character is now L to indicate RoHS compliance. (View old data sheet.) |
- Inductance values from 1.65 nH to 12.55 nH (tolerances as low as 2%)
- Tight tolerance can eliminate circuit tuning
- AEC-200 Grade 1 (-40°C to +125°C)
- Flat top jacket for mechanical stability and reliable pick and place operations
- Exceptionally high Q over a wide frequency range
- Highest possible self resonance (up to 6 GHz)
- Solder coated leads ensure reliable soldering
- RoHS-compliant 260°C compatible. Terminations: tin-silver over copper
- COTS Plus tin-silver-copper and tin-lead terminations available
- Samples of all values available in Coilcraft Designer's Kit C308
Photo 
Pricing 
Materials declaration 
PDF data sheet
SPECIFICATIONS
Q vs Frequency
L vs Frequency
Current Derating
Dimensions
Tape and reel specifications
3D model
0906
1606
S-Parameters
Transmission line models Modelithics™ substrate scalable models
 |
||||||||
| 0906-2KL_ | 2 | 1.65 | 10 | 100 | 800 | 10.0 | 4.0 | 1.6 |
| 0906-3_L_ | 3 | 2.55 | 5,2,1 | 100 | 800 | 8.2 | 5.0 | 1.6 |
| 0906-4_L_ | 4 | 3.85 | 5,2,1 | 100 | 800 | 7.5 | 6.0 | 1.6 |
| 0906-5_L_ | 5 | 5.40 | 5,2,1 | 100 | 800 | 7.0 | 8.0 | 1.6 |
| 1606-6_L_ | 6 | 5.60 | 5,2,1 | 100 | 800 | 6.5 | 9.0 | 1.6 |
| 1606-7_L_ | 7 | 7.15 | 5,2,1 | 100 | 800 | 6.0 | 10 | 1.6 |
| 1606-8_L_ | 8 | 8.80 | 5,2,1 | 100 | 800 | 6.0 | 12 | 1.6 |
| 1606-9_L_ | 9 | 9.85 | 5,2,1 | 100 | 800 | 5.2 | 13 | 1.6 |
| 1606-10_L_ | 10 | 12.55 | 5,2,1 | 100 | 800 | 4.6 | 14 | 1.6 |
 |
|
|
|
|
|
|
|
|
| 1 | When ordering, please specify tolerance, termination and packaging codes: e.g. 1606-10JLC | |
| Tolerance: | F = 1%, G = 2%, J = 5%, K = 10% (Table above shows stock tolerances in bold.) | |
| Termination: |
L
= RoHS compliant tin-silver (96.5/3.5) over copper. Special order, added cost: T = RoHS tin-silver-copper (95.5/4/0.5) over copper or S = non-RoHS tin-lead (63/37) over copper. |
|
| Packaging: | C =
7" machine-ready reel. EIA-481 embossed plastic tape, 500 parts per full reel. B = Less than full reel. In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead. |
|
| 2 | Inductance measured at 800 MHz using an Agilent/HP 4286A with a Coilcraft SMD-A fixture and correlation. | |
| 3 | Tolerances in bold are stocked for immediate shipment. | |
| 4 | Q measured at 800 MHz using an Agilent/HP 4291A with an Agilent/HP 16193A test fixture. | |
| 5 | SRF measured with an Agilent/HP 8720D network analyzer and a Coilcraft SMD-D test fixture. Details | |
| 6 | DCR tested on a Cambridge Technology Model 510 Micro-ohmmeter. | |
| 7 | Irms: Current that causes a 15°C temperature rise from 25°C ambient. Details | |
| 8 | Ambient temperature range: |
–40°C to +125°C with Irms current. +125°C to +140°C with derated current. Derating curve |
| 9 | Storage temperature range: | Component: –40°C to +140°C T&R packaging: –40°C to +80°C |
| 10 | Resistance to soldering heat: Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between. | |
| 11 | Electrical specifications at 25°C. | |
| 12 | Temperature coefficient of inductance: +5 to +70 ppm/°C. | |
| Refer to Soldering Coilcraft Components before soldering. | ||
|
||
|
|
||