PDLF Surface Mount
Data Line EMI Filters
- Eliminates the problem of conducted EMI in data line applications
- Provide common- and differential-mode noise attenuation
- Reduce noise by a factor of 32 from 15 MHz to 300 MHz
- High current (500 mA) versions available
- 300 Vrms isolation
- Excellent environmental stability and low cost
- Available in 4, 3 and 2 line versions
- Consider our CCDLF series for 10 and 8 line applications
- RoHS-compliant. 260°C compatible. Tin-silver-copper over tin over nickel over phos bronze terminations.
- Samples of all values plus samples of CCDLF and through-hole versions are available in Coilcraft Designer's Kit D303
Photo 
Pricing 
Materials declaration 
PDF data sheet
SPECIFICATIONS
Typical Response 
Schematics
Dimensions
 |
||||
| PDLF4000L_ | 4 | 100 | 5 | 250 |
| PDLF4500L_ | 4 | 500 | 5 | 200 |
| PDLF3000L_ | 3 | 100 | 5 | 250 |
| PDLF3500L_ | 3 | 500 | 5 | 200 |
| PDLF2000L_ | 2 | 100 | 5 | 250 |
| PDLF2500L_ | 2 | 500 | 5 | 200 |
 |
|
|
|
|
| 1 | When ordering, please specify packaging code: e.g. PDLF2500LC. | |
| Packaging |
C = 7" machine ready reel. EIA-481 embossed plastic tape (500 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13" machine ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2200 parts per full reel). |
|
| 2 | Current rating is for each line. | |
| 3 | Ambient temperature range: | –40°C to +85°C |
| 4 | Storage temperature range: | Component: –40°C to +85°C T&R packaging: –40°C to +80°C |
| 5 | Resistance to soldering heat: Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between. | |
| 6 | Electrical specifications at 25°C. | |
| Refer to Soldering Coilcraft Components before soldering. | ||
|
||
|
|
||