50/60 Hz Current Transformer CS2106
| New RoHS part numbers are shown. Lead was removed from terminations. The last character is now L to indicate RoHS compliance. (View old data sheet.) |
- For measuring current from 0.5 to 20 Amps rms
- 0.1 Volt per Ampere sensitivity (with terminating resistance of 68 Ohms)
- 2500Vrms isolation between windings
- May also be used to measure 400 Hz line currents
- Applications include sensing branch circuit overload and detecting load drop or shutdown
- RoHS-compliant. Tin-silver over tin over nickel over copper terminations.
Photo 
Pricing 
Materials declaration 
PDF data sheet
SPECIFICATIONS
Typical circuit
Typical response 
Dimensions
 |
|||||||
| CS2106L | 1 : 500 | 75 | 0.007 | 26 | 50 – 400 | 0.5 A – 20 A | 68 Ohms |
 |
|
|
|
|
|
|
|
| 1 | Inductance is for the secondary, tested at 1 kHz, 0.1 Vrms. | |
| 2 | Square wave response deteriorates above and below this frequency. | |
| 3 |
Use the following equation to determine the approximate change in output voltage/ input ampere when varying the terminating resistor: Vout / Iin = 0.1 × (RT / 68). |
|
| 4 | Ambient temperature range: | –40°C to +85°C |
| 5 | Storage temperature range: | Component: –40°C to +85°C Packaging trays: –40°C to +80°C |
| 6 | Electrical specifications at 25°C | |