High Frequency
Current Sensing Transformers
|
New RoHS part numbers are shown. Lead was removed from terminations. The last character is now L to indicate RoHS compliance. (View old data sheet.) |
- For use at frequencies up to 100 kHz
- 1 to 100 Volt per Ampere sensitivity (variable by changing termination resistance)
- Incorporates current and sense windings in one small, encapsulated package
- Designed to meet UL/CSA/IEC 60950 Reinforced Insulation; 3 mm creepage/clearance
- 3750 Vrms winding to winding isolation
- RoHS-compliant. Tin-silver over copper terminations.
- Samples of all values plus sensor-only versions available in Coilcraft Designer's Kit P403
Photo 
Pricing 
Materials declaration 
PDF data sheet
SPECIFICATIONS
 |
||||||
| CS4050V-01L | 50 | 5 | 5 – 25 | 2 mA – 10 A | 50 – 5000 | 50 Ohms |
| CS4100V-01L | 100 | 20 | 5 – 50 | 5 mA – 24 A | 100 – 10,000 | 100 Ohms |
| CS4200V-01L | 200 | 80 | 1 – 100 | 5 mA – 35 A | 200 – 20,000 | 200 Ohms |
 |
|
|
|
|
|
|
| 1 | Inductance is for the secondary, measured at 15.75 kHz, 1 Vrms. | |
| 2 | Square wave response deteriorates above and below this frequency. | |
| 3 | Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation: RT = Vout × Nsec / Iin. | |
| 4 | Ambient temperature range: | –40°C to +85°C |
| 5 | Storage temperature range: | Component: –40°C to +85°C Packaging tubes: –40°C to +80°C |
| 6 | Electrical specifications at 25°C | |
| Refer to Soldering Coilcraft Components before soldering. | ||
|
||
|
|
||