SMT Wideband Transformers
for
ADI D/A Converter
| New RoHS part numbers are shown. Lead was removed from terminations. The last character is now L to indicate RoHS compliance. (View old data sheet.) |
- Developed for Analog Devices D/A High-Speed Converters
- 400 Vrms primary to secondary isolation
- 250 mA maximum current rating
- Tapped secondary
- RoHS compliant. 260°C compatible. Tin-silver-copper over silver-platinum-glass frit terminations
- COTS Plus tin-silver-copper and tin-lead terminations available
Photo 
Pricing
Materials declaration
Z9280 Z9314 
PDF data sheet
SPECIFICATIONS
Dimensions 
Schematic 
Frequency Response
curves
 |
|||||||||
| Z9280-AL_ | 1 : 1 | 0.250 – 450 | 250 | 0.58 | 9.5 | 0.075 | 9.5 | 0.075 | Orange |
| Z9314-AL_ | 1 : 6.25 | 0.350 – 1700 | 250 | 1.10 | 30 | 0.080 | 4.5 | 0.038 | Black |
 |
|
|
|
|
|
|
|
|
|
| 1 | When ordering, please specify termination and packaging codes: e.g. Z9280-ALD | |
| Termination: | L = RoHS compliant tin-silver-copper over silver-platinum-glass frit Special order, added cost: S = non-RoHS tin-lead (63/37). |
|
| Packaging: |
D = 13" reel, machine-ready EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel In tape, not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. |
|
| 2 | Impedance ratio is for the full primary winding to the full secondary winding. | |
| 3 | Ambient temperature range: | –40°C to +85°C |
| 4 | Storage temperature range: | Component: –40°C to +85°C T&R packaging: –40°C to +80°C |
| 5 | Electrical specifications at 25°C. Measurements are referenced to 50 Ohms. | |
| Refer to Soldering Coilcraft Components before soldering. | ||
|
||